WikiLaundry > Stains > Tar > Jumper

Eliminate Tar Stains from Jumpers Easily with These Simple Steps!

Tar stains can be tricky to remove from clothing, especially jumpers which are prone to getting heavily soiled. But you don’t have to despair just yet! With the right method and a bit of persistence, you can easily get your jumper back to its original condition.


Updated 23 Jun 2023

By Isabelle Trottier

tar

Step 1: Scrape Off the Excess Tar

To start off, use a butter knife or an old credit card to scrape away as much of the excess tar as possible. Be sure to work gently and carefully, as hard scraping may cause damage to the fabric.

Step 2: Pretreat the Stain

There are several different ways to pretreat tar stains. For starters, you can apply some liquid dish soap directly onto the spot and allow it to sit for about five minutes. Alternatively, you can mix a tablespoon of borax powder with two tablespoons of white vinegar and then rub the solution into the tar stains. Let the mixture sit for 30 minutes before proceeding.

Step 3: Launder the Jumper as Usual

Once you’re done pre-treating the stains, it’s time to machine wash jumper. For best results, set the washer to a delicate cycle using cold water and your usual laundry detergent. You can also add an oxygen-based bleach to wash cycle if the stain still won’t budge.

Step 4: Check the Stains and Repeat if Needed

After washing, inspect the jumper closely for any remaining tar stains. If they’re still present, repeat steps 2 and 3 before air-drying the garment.

Conclusion

Tar stains can be difficult to remove, but with the right technique and a bit of patience, you can get them out of your favourite jumper in no time. Just follow the steps above and you’ll have your jumper looking as good as new in no time.

Try Laundryheap - 24h laundry service with free delivery

Never do laundry again. Save time for things you ❤️

Book now

© WikiLaundry 2024

Powered by Laundryheap