What supplies do I need to clean grease and oil stains?

To clean grease and oil stains from pumps, you will need paper towels or an old rag, dry cleaning solvent, a shoe brush, and water.

How do I remove the grease and oil stains?

To remove the grease and oil stains, start by blotting the stain with a paper towel or an old rag. Then, apply some dry cleaning solvent and let it sit for a few minutes before scrubbing the stain with a shoe brush. Finally, rinse the area with a clean cloth and water.

WikiLaundry > Stains > Grease and oil > Pumps

Get Rid of Grease & Oil Stains with Ease: The Ultimate Guide to Cleaning Your Pumps

Got grease and oil stains on your shoes? Don't worry! This guide will teach you how to effectively and efficiently clean them up with minimal effort so that you can get your pumps looking like brand new again.

Updated 20 Feb 2023

By Cyryl Wozniak

Grease and oil stains can be some of the most difficult to remove from shoes. In order to successfully clean them, you'll need the right tools and techniques. With this guide, we'll teach you the best methods for cleaning grease and oil stains off your pumps so that you can get them looking good as new.

What You'll Need

Before you begin, you'll need to gather a few supplies in order to have the best chance of removing the stains. Here's what you'll need:

Paper towels or an old rag
Dry cleaning solvent
Clean cloth
Shoe brush
Water

Step 1: Blot the Stain

Start by blotting the stain with a paper towel or an old rag. This helps to absorb some of grease or oil before it gets completely dried into the fabric of the shoe.

Step 2: Apply Dry Cleaning Solvent

Once you've blotted stain, it's time to apply some dry cleaning solvent. Spray the solvent directly onto the spot and then let it sit for a few minutes. This should help to break down stain and make it easier to remove.

Step 3: Brush Away Stain

After the dry cleaning solvent has had a chance to work, it's time to start scrubbing. Use a shoe brush to gently work the stain out of the fabric. Be careful not to scrub too hard, as you don't want to cause any damage to shoe.

Step 4: Rinse and Repeat

After you've brushed away the stain, it's time to rinse out the area. Use a clean cloth and some water to rinse out all of cleaning solution. Once the area is clean, you can go back to step 1 and repeat the process until the stain is completely removed.

That's It!

Now that you've followed the steps above, you should have successfully removed the grease or oil stains from your pumps. Just be sure to keep an eye out for any lingering stains and continue to follow these steps until they are all gone.

Try Laundryheap - 24h laundry service with free delivery

Never do laundry again. Save time for things you ❤️

Book now

WikiLaundry