Save your Mesh from Grease and Oil Stains - Here's How!

Keeping your mesh looking clean and free from grease and oil stains can be a challenge. While it may be tempting to reach for harsh cleaning chemicals, there are easier, safer ways to keep your mesh looking good. The following article outlines simple techniques you can use to quickly and easily take care of grease and oil stains.

What You'll Need

• Baking soda
• White vinegar
• Small plastic scrub brush
• Warm water
• Dish soap

Instructions

1. Mix a thick paste of baking soda and white vinegar in a small bowl.
2. Apply paste directly to the stain on mesh.
3. Let the paste sit for 15-20 minutes, depending on how severe the stain is.
4. Scrub the paste lightly with the small plastic scrub brush.
5. Rinse off paste with warm water.
6. If needed, add a few drops of dish soap and scrub again before rinsing.
7. Allow the mesh to air dry.

Tips and Warnings

• Always test the paste solution on a small, inconspicuous area first to make sure it will not damage the mesh.
• Be sure to rinse off the paste completely with warm water to prevent staining caused by residue left behind after cleaning.

Related

• Easy Steps to Remove Grease and Oil Stains from Cotton Chambray
• Say Goodbye to Grease & Oil Stains with This Easy Tank Top Cleaning Method!
• Cleaning Grease & Oil Stains Out of Venetian Lace - A Step-by-Step Guide
• Get Grease and Oil Out of Your Draperies and Curtains in No Time
• Effortlessly Clean Grease and Oil Stains off Your Belts
• "Say Goodbye to Grease and Oil Spots on Flannel Clothing with this Easy Cleaning Method"
• How to Quickly, Easily and Safely Remove Grease and Oil Stains from Your Watches
• Eliminating Grease and Oil Stains with Ease: An Easy Guide to Cleaning Baking Dishes
• Efficient Techniques for Removing Grease and Oil Stains from a Trench Coat
• Get Grease and Oil Stains Out of Fido's Favorite Bed