What materials are needed to clean adhesive tape stains?

You'll need a clean towel, vinegar or rubbing alcohol, cotton swabs, liquid laundry detergent, and a toothbrush.

How do I remove the adhesive residue?

Soak the stain in hot water for 10 minutes. Then apply a few drops of vinegar or rubbing alcohol and allow it to sit for 10 minutes. Finally, scrub the stain carefully with a toothbrush until the adhesive is completely removed.

What should I do after removing the stain?

Once the stain is gone, you can put the shirt in the washing machine with a small amount of liquid laundry detergent. After washing, hang the shirt to dry. Do not put the shirt in the dryer.

WikiLaundry > Stains > Adhesive tape > Collared shirt

A Step-by-Step Guide to Easily Clean Adhesive Tape Stains off Your Collared Shirt

No matter how careful you might be, adhesive tape stains are bound to appear on your collared shirt eventually. To make life easier, here's a guide with some easy tips to help you get rid of those pesky stains.

Updated 20 Jun 2023

By Matej Kramberger

Adhesive tape can leave behind sticky residue that is difficult to remove from collared shirts. In addition to being unattractive, these residues can also attract dirt and further complicate the cleaning process.

What You'll Need

Before you start cleaning, it's important to make sure that all the materials you need are available. Here's what you'll need:

A clean towel
Vinegar or rubbing alcohol
Cotton swabs
Liquid laundry detergent
Toothbrush

Step 1: Soak Stain in Hot Water

First, wet the stain with hot water using a clean towel. Make sure the water is very hot. Allow water to seep in for about 10 minutes to make sure the adhesive is softened up. This will make it easier for removal.

Step 2: Apply the Vinegar or Rubbing Alcohol

Once the stain has been soaked, apply a few drops of either vinegar or rubbing alcohol to the stain. Make sure to use white and distilled vinegar – avoid colored varieties. Use a cotton swab to dab the solution on the stain and allow it to sit for about 10 minutes.

Step 3: Scrub Stain with a Toothbrush

Take a toothbrush and gently scrub the stained area. Make sure to apply pressure while scrubbing so that the adhesive is completely removed. If there is still some residue left behind, you can repeat this step until it is completely removed.

Step 4: Wash the Shirt

Now that the stain is gone, it's time to wash the shirt. Put the shirt in the washing machine and add a small amount of liquid laundry detergent. Wash the shirt on a gentle cycle and then hang it to dry. Do not put shirt in the dryer, as this can cause the stain to set in.

Conclusion

With these simple steps, you can easily remove adhesive tape stains from your collared shirt. Remember to always use caution when cleaning stains, as this will help you get the best results. Good luck!

Try Laundryheap - 24h laundry service with free delivery

Never do laundry again. Save time for things you ❤️

Book now

WikiLaundry